Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Instrukcja Użytkownika Pobierz pdf (Strona 39)

Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012 39

Chapter

Use a PowerFlex 40 Drive in an RSLogix 5000 Project

In this chapter, you complete the following tasks:

• Create DeviceNet tags with the DeviceNet Tag Generator tool

• Download the updated RSLogix 5000 project to your controller

• Edit the drive parameter values

• Test the drive tags

IMPORTANT

Multiple Logix5000 control systems can use PowerFlex 40 drives over a DeviceNet network. For example purposes,

this quick start describes the use of PowerFlex 40 drives over a DeviceNet network in a CompactLogix 5370 L3

control system that includes a 1769-SDN scanner module in a local expansion module slot.

This section uses the example RSLogix 5000 project created in Associate the DeviceNet Configuration File with an

RSLogix 5000 Project on page 33 named PFlex40_Drive_on_DeviceNet_quick_start.acd. The 1769-SDN

scanner module has been configured so the RSNetWorx tab links the RSLogix 5000 project to the DeviceNet file

created in Create a DeviceNet Configuration File on page 29.

If you use a different Logix5000 controller and DeviceNet scanner module, you can complete the tasks in this

chapter but must account for any software differences.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Brak uwag

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Instrukcja Użytkownika Strona 39