Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Instrukcja Użytkownika Pobierz pdf (Strona 33)

Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012 33

Create DeviceNet Network Software Files Chapter 2

Associate the DeviceNet Configuration File with an RSLogix 5000 Project

You must associate the DeviceNet network configuration file with your RSLogix 5000 project.

1. Verify the controller’s mode switch

is in the PROG position.

2. Open a new RSLogix 5000

project.

3. Add the appropriate DeviceNet

scanner module to the controller’s

I/O configuration.

This example uses a 1769-SDN

scanner module in a

CompactLogix 5370 L3 controller

project.

4. Configure the scanner module’s

parameters on the General and

Connection tabs as desired.

TIP

If you already created an RSLogix 5000 project for your Logix5000 controller, as described in Logix5000 controller quick

starts, go to step 5 on page 34.

RUN

REM

PROG

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 53 54

Brak uwag

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Instrukcja Użytkownika Strona 33