
3-4
EtherNet/IP Communications Module
For GV6000 and SP600 6SB series drives, mount the
module on the drive using the four captive screws to
secure and ground it to the drive.
Important: All screws must be tightened since the module is
grounded through a screw. The recommended
tightening torque is 0.9 N-m (8 in-lb).
Figure 3.3 – Mounting the Module
Module
SP600 6SP Series Drive
Internal Interface cable
folded behind the module
and in front of the drive.
GV6000 or SP600 6SB Series Drive
Komentarze do niniejszej Instrukcji