Rockwell-automation 1560E SMC Flex Smart Motor Controller Instrukcja Użytkownika Pobierz pdf (Strona 81)

Programming

Overview This chapter provides a basic understanding of the programming keypad

built into the SMC-Flex controller. This chapter also describes programming

the controller by modifying the parameters.

Keypad Description The keys found on the front of the SMC-Flex controller are described below.

Escape

Exit a menu, cancel a change to a parameter value,

or acknowledge a fault/alarm.

Select

Select a digit, select a bit, or enter edit mode in a

parameter screen.

Up/Down

Arrows

Scroll through options increase/decrease a value,

or toggle a bit.

Enter

Enter a menu, enter edit mode in a parameter screen,

or save a change to a parameter value.

Note: For ease of programming values, after using the Enter key to edit,

use the Sel key to jump to the digit that needs to be modified, then

use the arrow keys to scroll through the digits.

Programming Menu Parameters are organized in a three-level menu structure for

straightforward programming. Figure 4.1 details the programming menu

structure and the three-level hierarchy.

In order to change parameters, the controller must be in the STOP mode,

and the control voltage must be present.

Chapter

1560E-UM050B-EN-P - June 2013

EscEsc

SelSel

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 197 198

Brak uwag

Rockwell-automation 1560E SMC Flex Smart Motor Controller Instrukcja Użytkownika Strona 81