Rockwell-automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual Instrukcja Użytkownika Pobierz pdf (Strona 49)

Publication 1734-UM002C-EN-P - July 2003

Using Auto Start Mode 3-5

3. Insert the DeviceNet network plug and tighten the

holding screws.

4. Set the node address using the 2-position thumbwheel switch.

Valid physical settings range from 00 to 63 (Factory setting =63).

Press either the + or - buttons to change the number.

You can also set the node address to some value between 64-99.

In this case, you can change the adapter’s node address via the

RSNetWorx for DeviceNet software. If a value between 64-99 is

used, at power-up the node address stored in the adapter’s

non-volatile memory is used.

31111-MC

DeviceNet network plug

Holding screw

Adapter

Status

Network

Status

Subnet

Status

1734-ADNX

Field

Power

System

Power

Network Node

Address Thumbwheel

42510

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 135 136

Brak uwag

Rockwell-automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual Instrukcja Użytkownika Strona 49