Rockwell-automation 1734-IT2I Thermocouple and RTD Input Module User M Instrukcja Użytkownika Strona 43
- Strona / 84
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Publication 1734-UM004F-EN-E - December 2012
Configure Your Module 33
• Scaling – Values returned when input is at low scale value or high scale
value. The low and high scale points are different for each sensor input:
To configure your RTD module, select Configuration as shown in the figure.
Use the procedures in the figures that show basic setup and advanced setup,
noting that you complete steps 1 and 2 during basic setup, then continue with
steps 3…13 during advanced setup.
RTD Module Scaling Limits
RTD Type Low Scaling
Endpoint
High Scaling
Endpoint
O hms 100 Ω 500 Ω
100 Ω Pt α = 0.00385 Euro 32 °F (0 °C) 932 °F (500 °C)
200 Ω Pt α = 0.00385 Euro 32 °F (0 °C) 932 °F (500 °C)
100 Ω Pt α = 0.003916 U.S. 32 °F (0 °C) 932 °F (500 °C)
200 Ω Pt α = 0.003916 U.S. 32 °F (0 °C) 932 °F (500 °C)
10 Ω Cu α = 0.00427 32 °F (0 °C) 482 °F (250 °C)
100 Ω Ni α = 0.00618 32 °F (0 °C) 482 °F (250 °C)
120 Ω Ni α = 0.00672 32 °F (0 °C) 482 °F (250 °C)
120 Ω Ni α = 0.00618 32 °F (0 °C) 482 °F (250 °C)
RTD Type (1734-IR2E) Low Scaling
Endpoint
High Scaling
Endpoint
O hms 100 Ω 200 Ω
100 Ω Pt α = 0.00385 Euro 32 °F (0 °C) 572 °F (300 °C)
1. To configure your RTD module,
select Configuration and
modify the parameters as
desired for your application.
2. When complete, download to
your module by clicking the
Download to Device button.
You can download each
change as you make it using
Single, or download all your
changes using All. If you press
the Apply button, only the
selected parameter
downloads to the module.
3. Click here when finished.
- User Manual 1
- Important User Information 2
- Table of Contents 3
- Appendix B 5
- Accuracy Drift 5
- Summary of Changes 7
- Who Should Use this 9
- Purpose of this Manual 9
- Common Techniques Used 10
- About POINT I/O Modules 11
- Selecting a Module Input 12
- Communicating with Your 12
- (catalog number 1734-IT2I) 13
- Use Module Alarms 15
- (1734-IT2I module) 16
- Chapter Summary 16
- Cold Junction 16
- Compensation 16
- Install the Module 17
- Install the Mounting Base 18
- 1734-IT2I shown 19
- Install an I/O Module 20
- 1734-RTD - Position 6 21
- 1734-IT2I - Position 6 21
- Install the Removable 22
- Terminal Block 22
- Remove a Mounting Base 23
- Wire the Modules 24
- Configure Your Module 27
- IMPORTANT 28
- Add the Adapter to Your 29
- Set the Thermocouple Input 32
- Module Parameters Using 32
- RSNetWorx 32
- Setting Parameters 33
- Configure Your 34
- Thermocouple Input 34
- Advanced Setup Parameters 35
- Basic Setup 37
- Advanced Setup 38
- Set the RTD Input Module 39
- Parameters Using 39
- Configure Your RTD Input 41
- Check I/O Status and View 46
- Calibrate Your Module 49
- Calibrate the Thermocouple 50
- Input Module 50
- ATTENTION 51
- Click Device Parameters to 51
- Input (mV) Calibration 52
- Select Cold Junction 0, Cold 55
- Tools and Equipment 58
- Required to Calibrate 58
- Your RTD Module 58
- Calibrate the RTD Input 58
- Troubleshoot the Module 63
- Appendix 65
- Overview 65
- Understanding Data 65
- Connection, and 65
- Communication Formats 65
- Use the Help Button 67
- Working with Dialogs 67
- Alarm Configuration Dialog 69
- Calibration Dialog 70
- Configuration Dialog 72
- Alarm Configuration Dialog 74
- Full Scale Values 80
- 72 Index 82
- 73 83
- Rockwell Automation Support 84
- Documentation Feedback 84
Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 1734-IT2I Thermocouple and RTD Input Module User M
Ekwipunek Rockwell-automation 1756-DNB ControlLogix DeviceNet Scanner Module Ins Instrukcja Użytkownika
(48 strony)
(48 strony)
Ekwipunek Rockwell-automation 1771-QI,D17716.5.126 PLASTIC MOLD.MODULE Instrukcja Użytkownika
(153 strony)
(153 strony)
Ekwipunek Rockwell-automation 1763-L16xxx MicroLogix 1100 Embedded Web Server Us Instrukcja Użytkownika
(30 strony)
(30 strony)
Ekwipunek Rockwell-automation 1793-IV16 Flex Integra Input Module Install Inst Instrukcja Użytkownika
(12 strony)
(12 strony)
Ekwipunek Rockwell-automation 1756-XXXX ControlLogix Digital I/O Modules Instrukcja Użytkownika
(258 strony)
(258 strony)
Ekwipunek Rockwell-automation 1769-OW8 Compact AC/DC Relay Output Module Instrukcja Użytkownika
(20 strony)
(20 strony)
Ekwipunek Rockwell-automation 1734-ARM POINT I/O Address Reserve Module Instrukcja Użytkownika
(16 strony)
(16 strony)
Ekwipunek Rockwell-automation 1756-CN2_CN2R, Series B ControlLogix ControlNet In Instrukcja Użytkownika
(36 strony)
(36 strony)
Ekwipunek Rockwell-automation 1771-DE Absolute Encoder Module User Manual Instrukcja Użytkownika
(80 strony)
(80 strony)
Ekwipunek Rockwell-automation 1771-ODD INSTL.DATA AC/DC (220/44)INPUT Instrukcja Użytkownika
(12 strony)
(12 strony)
Ekwipunek Rockwell-automation 1771-IFE , D17716.5.90 USER MNL. ANALOG INPUT Modu Instrukcja Użytkownika
(63 strony)
(63 strony)
Ekwipunek Rockwell-automation 1789-L10_L30_L60 SoftLogix 5800 Controller Install Instrukcja Użytkownika
(14 strony)
(14 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji