Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Instrukcja Użytkownika Pobierz pdf (Strona 44)

3-6 Configuring the Module

3. Click on the Chan. 1 tab (Figure 3.3) and set the I/O Config data

area accordingly. In this example, the 1769-SM2 is configured to

fault if the controller is switched to Program mode, and one drive is

connected at node address 100.

Figure 3.3 Chan. 1 Tab Data Example Screen

Important: When using Multi-Drive mode, the node addresses

entered in the Drive Addr x fields must match the

corresponding drive Parameter 104 - [Comm Node

Addr] value in the PowerFlex 4-Class drives so that the

1769-SM2 module will communicate with the drives.

Note that the DSI Fault Config settings can only be accessed if the

Idle Action is set to “Send Flt Cfg” (Figure 3.4

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 203 204

Brak uwag

Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Instrukcja Użytkownika Strona 44