Rockwell-automation 1786-RPA/B ControlNet Modular Repeater Adapter Ins Instrukcja Użytkownika Pobierz pdf (Strona 5)

ControlNet Modular Repeater Adapter 5

Rockwell Automation Publication 1786-IN013F-EN-P - April 2011

European Hazardous Location Approval

European Zone 2 Certification (The following applies when the product bears the

Ex Marking.)

This equipment is intended for use in potentially explosive atmospheres as defined by

European Union Directive 94/9/EC and has been found to comply with the Essential Health

and Safety Requirements relating to the design and construction of Category 3 equipment

intended for use in Zone 2 potentially explosive atmospheres, given in Annex II to this

Directive. Compliance with the Essential Health and Safety Requirements has been assured

by compliance with EN 60079-15 and EN 60079-0.

WARNING: You must follow these guidelines:

• This equipment must be installed in an enclosure providing at least

IP54 protection when applied in Zone 2 environments.

• This equipment shall be used within its specified ratings defined by

Rockwell Automation.

• Provision shall be made to prevent the rated voltage from being

exceeded by transient disturbances of more than 40% when

applied in Zone 2 environments.

• Secure any external connections that mate to this equipment by

using screws, sliding latches, threaded connectors, or other means

provided with this product.

• Do not disconnect equipment unless power has been removed or

the area is known to be nonhazardous.

ATTENTION: This equipment is not resistant to sunlight or other

sources of UV radiation.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Brak uwag

Rockwell-automation 1786-RPA/B ControlNet Modular Repeater Adapter Ins Instrukcja Użytkownika Strona 5