Rockwell-automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Devic Instrukcja Użytkownika Pobierz pdf (Strona 11)

Rockwell Automation Publication 1788-UM059A-EN-P - August 2014 11

Install the Linking Device Chapter 2

2. Connect the power cable to the linking device.

The female terminal block connector is provided with the linking device.

3. Apply power to the linking device and DeviceNet network.

Set the DeviceNet Node

Address and Data Rate

Two methods can be used to set the DeviceNet node address and the data rate:

• Use the node address and data rate rotary switches on the side of the

linking device

• Use RSNetWorx for DeviceNet software

Set the DeviceNet Node Address and Data Rate by Using the

Rotary Switches

The rotary switches are on the right side of the linking device.

Set the desired node address and data rate according to the table below.

Pin No. Description

1 +24 V DC

2GND

3PE (Protective Earth)

123

Switch Node Address

00 - 63 DeviceNet node address

Other value Node address selected via RSNetWorx

software

Switch Data Rate

0 125 kbps

NA x10

NA x1

DATA RATE

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Brak uwag

Rockwell-automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Devic Instrukcja Użytkownika Strona 11