Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Instrukcja Użytkownika Pobierz pdf (Strona 36)

Publication 1794-UM066A-EN-P - February 2012

28 Rack Optimized Discrete I/O

1. In the Project dialog, right-click the local 1756-EN2TR module under the

I/O Configuration folder, and then select New Module.

The Select Module Type dialog opens.

2. Select the 1794-AENTR Ethernet adapter from the list and click Create.

The Module Properties dialog opens.

3. Specify the following parameters in the General tab of the New Module

dialog:

4. Verify that the Module Definition values are as follows:

Name FLEX_IO_Adapter

IP Address 130.130.130.3

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 87 88

User Manual 1
Important User Information 2
Who Should Use this 3
Purpose of this Manual 3
Common Techniques Used 4
Table of Contents 5
Table of Contents vii 7
EtherNet/IP Adapter Module 9
Adapter Features 10
Types of Adapters 10
Hardware and Software 10
Compatibility 10
Producer/Consumer Model 11
What the Adapter Does 11
Use of the Control and 11
Information Protocol (CIP) 11
Understanding the 11
Specifying the Requested 12
Packet Interval (RPI) 12
Support of Rack Optimized 12
Chapter Summary 13
Install Your FLEX I/O Adapter 15
Mount Your Adapter on a 16
DIN Rail 16
Mount on a Panel or Wall 17
Connect Wiring 19
Set the Network Address 20
Mounting Dimensions 21
EtherNet/IP Network 23
Gateway Address 24
Subnet Mask 25
Use the Rockwell 26
BootP/DHCP Utility 26
Configure Your Adapter 29
Rack Optimized Discrete I/O 31
Create the Example 32
Application 32
Configure the I/O 34
Name EN2TR 35
IP Address 130.130.130.2 35
Revision 3.1 35
Name FLEX_IO_Adapter 36
IP Address 130.130.130.3 36
Add the Digital Input Module 38
Add the Digital Output Module 39
The New Module dialog opens 40
Edit the Controller Tags 41
Create the Ladder Program 42
Test the Example 43
Overview 45
Set Up the Hardware 45
Add the Analog Modules to 47
Name FLEX_Analog_Input 48
Comm Format 48
Input Data 48
Name FLEX_Analog_Output 51
Output Data 51
Tag Type 54
Analog_Test_Signal Timer 54
Modify the Ladder Program 55
Interpret Status Indicators 59
Specifications 61
Certifications 63
56 Specifications 64
Communication Driver 65
8. Close RSLinx 67
Adapter Web Dialogs 69
Work with the Diagnostics 71
64 Adapter Web Dialogs 72
Use the Network Settings Page 73
66 Adapter Web Dialogs 74
Use the I/O Connections Page 75
Work with the 76
Configuration Pages 76
Use the Device Identity Page 77
70 Adapter Web Dialogs 78
Adapter Web Dialogs 71 79
Use the Device Services Page 80
Numerics 81
74 Index 82
Index 75 83
76 Index 84
Index 77 85
78 Index 86
Rockwell Automation Support 88
Documentation Feedback 88

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Instrukcja Użytkownika Strona 36

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP