Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Instrukcja Użytkownika Pobierz pdf (Strona 46)

Publication 1794-UM066A-EN-P - February 2012

38 Analog I/O with Direct Connection

• Note that in the example application, the Logix5572 controller and

1756-EN2TR module are in the slots shown above in the ControlLogix

chassis.

• Verify that the IP addresses for the 1756-EN2TR module, 1794-AENTR

adapter, and programming terminal are correct.

• Verify the position (slot) of the I/O modules on the DIN rail.

• Verify that all wiring and cabling is properly connected.

• Make sure you have your communication driver (for example, AB_ETH-1

or AB_ETHIP-1) configured in RSLinx as described in Appendix C

Create the Example

Application

Perform the following steps to create the example application:

1. Start the RSLogix 5000 Enterprise Series software.

The RSLogix 5000 main dialog opens.

Local

Chassis

FLEX I/O

Logix5572

Controller

1794-OB16

Digital Output

1794-IB16

Digital Input

1756-EN2TR

130.130.130.2

1794-AENTR

130.130.130.3

Data

Programming

terminal

130.130.130.1

SLOT 1 2

1794-OF4I

Analog

Output

1794-IF4I

Analog Input

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 87 88

Brak uwag

Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Instrukcja Użytkownika Strona 46