Rockwell-automation 2711 Standard PanelView Operator Terminal User Man Instrukcja Użytkownika Pobierz pdf (Strona 169)

169Publication 2711-UM014G-EN-P - September 2008 169

Chapter

Installing the PV1400 Terminal

Chapter Objectives

This chapter describes how to mount the PV1400 terminal in a panel

or enclosure including:

• enclosures

• recommended tools

• mounting dimensions

• clearances

• cutout dimensions

• installing the PV1400 terminal in a panel

Enclosures

The PV1400 terminal must be mounted in an environment that

provides IEC-1131-2 Pollution degree 2 protection.

Mount the PV1400 terminal in a panel or enclosure to protect the

internal circuitry. The terminal meets NEMA Type 12/13 and 4X

(indoor use) ratings only when mounted in a panel or enclosure with

the equivalent rating.

Allow enough space within the enclosure for adequate ventilation.

Consider heat produced by other devices in the enclosure. The

ambient temperature around the terminals must be between 0…55 °C

(32…131 °F).

Make provisions to access the back sides of the terminal. Access is

required for wiring, routine maintenance, adjusting

brightness/contrast, installing a memory card and troubleshooting.

Required Tools

In addition to the tools required to make the panel cutout, you need

the tools below.

For clip mounting:

• socket screwdriver (phillips head or slotted)

• 406 mm (16 in.) extension rod (minimum)

• socket driver (in/lab torque wrench recommended)

IMPORTANT

PanelView 1400 terminals are no longer available. Contact your

local sales office or authorized Rockwell Distributor for suitable

substitutes.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 291 292

Brak uwag

Rockwell-automation 2711 Standard PanelView Operator Terminal User Man Instrukcja Użytkownika Strona 169