Rockwell-automation 2711 Standard PanelView Operator Terminal User Man Instrukcja Użytkownika Pobierz pdf (Strona 258)

258 Publication 2711-UM014G-EN-P - September 2008

Appendix B Messages, Codes and Self-test Numbers

DF1 Terminal Messages

Terminal Codes

Terminal Codes are displayed on the PanelView terminal during

operation or terminal configuration.

DeviceNet Codes

Comm Status codes appear as a banner at the top of an application

screen or as a status indicator on the terminal’s Configuration screen.

Error 634 appears in upper left of banner. Codes less than 12 are

minor faults and clear automatically when corrected. Codes above 12

require a terminal reset to clear.

Error Number Terminal

Messages

Type Meaning Recommended Action

675 or 682 Required network

node(s) not found

Comm Status The network is active, but the logic

controller(s) are not located at the

expected nodes.

Verify that the logic controller(s)

required by the application are at the

expected node addresses and that

the communication parameters are

set properly.

676 or 683 File access error Comm Status The terminal is trying to access one

or more controller data files that are

unavailable. If the message is

flashing, the terminal is trying to read

or write data files that are

unavailable.

The data files do not exist on the

controller. Create the data files.

679 or 686 Panelview offline Comm Warning PanelView is offline. Check connections

681 or 688 DF1 hardware

failed

Comm Status During startup the terminal detected

a missing, corrupt, or nonfunctional

DF1+ card. The terminal will run but

not communicate.

Contact technical support and provide

terminal message.

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 291 292

Brak uwag

Rockwell-automation 2711 Standard PanelView Operator Terminal User Man Instrukcja Użytkownika Strona 258