Rockwell-automation 1747-DTAM-E,D17476.1 Data Table Access Module (DTA Instrukcja Użytkownika Pobierz pdf (Strona 27)

Module Setup Procedure 3-5

Publication 1747-6.1

Setting the Baud Rate

This is the communications rate for the module. Available baud rates

are: 1200, 2400, 9600 and 19200 baud. The default baud rate

displayed is 19200.

• To scroll through the available baud rates:

Press [

]or[ ].

• To accept the displayed baud rate:

Press [

Setting the Auto

Attach Function

This selection determines how the module attaches to a processor.

The default selection is Off.

When the function is set to Off, you are required to manually attach to

a processor each time the module is powered up.

When the function is set to On, the module attempts to attach to the

address of the last processor it was logically attached to or to the

default node address of one.

• To toggle between On and Off:

Press [

]or[ ].

• To accept the setting:

Press [

Important: All devices on the DH485 network, including the

module, must be set to the same baud rate.

Select Baud Rate

19200

Set Auto Attach

OFF

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 115 116

Brak uwag

Rockwell-automation 1747-DTAM-E,D17476.1 Data Table Access Module (DTA Instrukcja Użytkownika Strona 27