Rockwell-automation 1747-DTAM-E,D17476.1 Data Table Access Module (DTA Instrukcja Użytkownika Pobierz pdf (Strona 58)

7-4 Processor Control Functions

Publication 1747-6.1

Transferring Memory

from EEPROM to RAM

You may transfer a program between processor EEPROM and RAM

memory.

To transfer EEPROM to RAM, from any display:

1. Configure the module for the Modify mode.

2. Make sure the processor is in the Program mode.

3. To initiate the memory transfer:

Press

4. The module displays:

5. To confirm:

Press

To abort the memory transfer:

Press

The display returns to the previous Ready

Attached screen.

6. When the transfer is initiated, the module displays:

7. If the memory transfer is successful, the module displays:

If the program contained in the EEPROM is password-protected,

you are required to re-enter the password at this point.

8. When the transfer is complete (or the password is entered, if

required), the module displays the Ready Attached screen:

If an error occurs during the transfer, an error message displays on the

bottom line of the display. Refer to chapter 9, Troubleshooting.

Confirm?

PROM -> CPU RAM,

Working....

PROM -> CPU RAM,

Transfer Success

PROM -> CPU RAM,

RDY> 4 RHALT

5/02 1111

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 115 116

Brak uwag

Rockwell-automation 1747-DTAM-E,D17476.1 Data Table Access Module (DTA Instrukcja Użytkownika Strona 58