Rockwell-automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATI Instrukcja Użytkownika Strona 61

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 104
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 60
Rockwell Automation Publication 1788-UM057B-EN-P - September 2014 59
Diagnostics Chapter 4
Device Type Manager (DTM)
Use the HSThinFrame to open the device DTM in the Studio 5000 Logix
Designer application. The DTM is read-only when opened in the Studio 5000
Logix Designer application.
Follow these steps to open the DTM.
1. Click Advanced in the config tree.
2. Choose the DD revision from the pull-down list.
3. Click Open DTM.
4. Choose the device information that you want to view.
IMPORTANT
The correct DTM must be installed and the HSProcessUtility DTM Catalog must
be updated for the correct DTM to display in the pull-down list.
Przeglądanie stron 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 103 104

Komentarze do niniejszej Instrukcji

Brak uwag