Rockwell-automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATI Instrukcja Użytkownika Pobierz pdf (Strona 63)

Rockwell Automation Publication 1788-UM057B-EN-P - September 2014 61

Appendix A

Linking Device Display Status

The display of the linking device provides status and diagnostic data in one of

three page formats: main page, H1 master page, or field device page. Use the

display Page button behind the front cover to scroll through the pages (see

Figure 8 on page 46

for location of the Page button).

Main Page

The main page is the default display, and

the linking device returns to this page after

10 seconds.

H1Bus A/B: Displays the bus voltages on

each port.

IP: Displays the current IP address or

BOOTP if enabled.

STS: Displays the status (see Tab le 7

Table 7 - STS Status Descriptions

The lower portion of the main page shows the communication quality to each

field device as the percentage of data packets sent compared to data packets

received for each field device index (see Tab le 8

Table 8 - Field Device Communication Quality

Status Description

Ok No events

New device found New device on the bus

Redundancy ok Masters are synchronized

Redundancy err Masters out of sync

Bus A Tripped Bus A over current trip

Bus B Tripped Bus B over current trip

SAFE MODE linking device set to Safe mode

Display Communication Quality Display Communication Quality

>>> 95+ ??? Unknown

>> 80+ OOS Allocated, On-line, not Compelling Data

> 60+ Off Allocated, Off-line

XXX Below 60 Err Allocated, On-line, not producing

Compelled Data

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 103 104

Brak uwag

Rockwell-automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATI Instrukcja Użytkownika Strona 63