Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Instrukcja Użytkownika Strona 179
- Strona / 238
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013 179
Adapter Parameters Appendix B
51
52
[Peer A Output]
[Peer B Output]
Selects the source of the peer I/O output data. The
adapter transmits this data to the network.
Important: Changes to these parameters are
ignored when Parameter 53 - [Peer Out Enable]
is set to ‘1’ (On).
Default: 0 = Off
Default: 0 = Off
Values: 0 = Off
1 = Cmd/Ref
2 = Datalink A Input
3 = Datalink B Input
4 = Datalink C Input
5 = Datalink D Input
6 = Datalink A Output
7 = Datalink B Output
8 = Datalink C Output
9 = Datalink D Output
Type: Read/Write
Reset Required: No
53 [Peer Out Enable]
Determines if peer I/O output is on or off.
Default: 0 = Off
Values: 0 = Off
1 = On
Type: Read/Write
Reset Required: No
54 [Peer Out Time]
Sets the minimum time that an adapter will wait
when transmitting data to a peer.
Important: Changes to these parameters are
ignored when Parameter 53 - [Peer Out Enable]
is set to ‘1’ (On).
Default: 10.00 Seconds
Minimum: 0.01 Seconds
Maximum: 10.00 Seconds
Type: Read/Write
Reset Required: No
55 [Peer Out Skip]
Sets the maximum time that an adapter will wait
when transmitting data to a peer. The value of
Parameter 54 - [Peer Out Time] is multiplied by
the value of this parameter to set the time.
Important: Changes to these parameters are
ignored when Parameter 53 - [Peer Out Enable]
is set to ‘1’ (On).
Default: 1
Minimum: 1
Maximum: 16
Type: Read/Write
Reset Required: No
56 [Web Enable]
Displays the setting of the adapter Web Pages
Switch (SW2) when the adapter was last reset.
Default: 0 = Disabled
Values: 0 = Disabled
1 = Enabled
Type: Read Only
57 [Web Features]
Sets the access to the Web interface and Web
configurable email notification feature.
Default: xxxx xxx0
Bit Values: 0 = Disabled
1 = Enabled
Type: Read/Write
Reset Required: No
Parameter
No. Name and Description Details
Bit
Definition
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
E-mail Cfg
Default xxxxxxx1
Bit 76543210
- User Manual 1
- Important User Information 2
- Table of Contents 3
- Chapter 4 4
- Configuring the I/O 4
- Chapter 5 4
- Using the I/O 4
- Chapter 6 4
- About This Manual 7
- Conventions Used in This 7
- Rockwell Automation 7
- Additional Resources 8
- Getting Started 11
- Features 12
- Compatible Products 13
- Required Equipment 13
- Safety Precautions 15
- Quick Start 16
- Installing the Adapter 17
- Preparing for an 18
- Installation 18
- Setting the Web Pages 19
- Connecting the Adapter to 20
- Applying Power 24
- and page 145 25
- Commissioning the Adapter 26
- Configuring the Adapter 27
- Using the PowerFlex 7 28
- Class HIM 28
- Using BOOTP 29
- Setting the IP Address 32
- Subnet Mask, and Gateway 32
- Setting the Data Rate 34
- Setting the I/O 35
- Configuration 35
- Selecting Master-Slave or 36
- Peer-to-Peer 36
- Communication) 37
- Setting the Reference 41
- Adjustment 41
- Setting a Fault Action 41
- Setting Web Access 42
- Resetting the Adapter 43
- Viewing the Adapter Status 44
- Using Parameters 44
- Updating the Adapter 44
- Firmware 44
- Figure 9 - Controller Tags 57
- Figure 11 - Controller Tags 66
- Limitations Using a 68
- Controller 68
- Controller Example 68
- Select the Controller 70
- Steps 2…5 71
- Steps 6…9 71
- Timeout 72
- Datalink Out 73
- Steps 1…4 73
- Steps 5…8 73
- Understanding the I/O 80
- · PowerFlex 700H drives 81
- Using Logic Command/ 84
- Using Reference/Feedback 84
- Par. 82 - [Maximum Speed] 85
- Using Datalinks 86
- Example Ladder Logic 87
- Program Information 87
- Logic Program 91
- Example Datalink Data 94
- Generic Profile 95
- 50 Controllers 99
- Using Explicit Messaging 105
- About Explicit Messaging 106
- Performing Explicit 106
- Messages 106
- ControlLogix Controller 108
- Examples 108
- Parameter 121
- 7-Class drive 123
- MicroLogix 1100/1400 124
- Controller Examples 124
- Read/Write Parameter Service 125
- Single Parameter 130
- Troubleshooting 143
- Port Status Indicator 144
- Network Status Indicator 145
- Link (LS1, LS2) Status 145
- Indicator 145
- NET A Status Indicator 145
- Hardware Reset via Node 146
- Switches 146
- Viewing Adapter 146
- Diagnostic Items 146
- Viewing and Clearing 149
- Table 25 - Adapter Events 150
- Viewing the Adapter Web Pages 153
- Process Display Home 156
- Browse DPI Device Folder 156
- Diagnostics Web Page 157
- Network Setting Link 158
- EtherNet/IP Statistics Link 159
- Ring Statistics link 159
- Administrative Web Pages 160
- Device Identity Link 161
- Network Configuration Link 161
- Email Configuration Link 162
- Password Configuration 165
- Kit (20-XCOMM-DC-BASE) 167
- Specifications 169
- Mechanical 170
- Environmental 170
- Regulatory Compliance 170
- Adapter Parameters 171
- EtherNet/IP Objects 181
- Identity Object 182
- Assembly Object 183
- Register Object 184
- Parameter Object 185
- Instances 186
- Class Attributes 186
- Instance Attributes 187
- Parameter Group Object 188
- Device Level Ring Object 189
- Quality of Service Object 190
- PCCC Object 190
- DPI Device Object 196
- DPI Parameter Object 198
- Formula number 201
- Extended DPI descriptor 201
- DPI Fault Object 204
- DPI Alarm Object 206
- DPI Diagnostic Object 207
- DPI Time Object 209
- TCP/IP Interface Object 211
- Ethernet Link Object 213
- Logic Command/Status Words 215
- Logic Status Word 216
- PowerFlex 700S Drives 217
- SMC Flex Controllers 219
- SMC-50 Controllers 219
- Logic Command Word (Control) 220
- Glossary 221
- D Data Rate 222
- Glossary 223
- F Fault Action 224
- G Gateway 225
- H Hardware Address 225
- I Idle Action 225
- L Logic Command/Logic Status 226
- M Master-Slave Hierarchy 227
- N NVS (Nonvolatile Storage) 227
- R Reference/Feedback 227
- S Scanner 228
- Z Zero Data 229
- Index 233
Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun
Ekwipunek Rockwell-automation 20D PowerFlex 700S Drive Ph I Control, Frames 1... Instrukcja Użytkownika
(248 strony)
(248 strony)
(2 strony)
Ekwipunek Rockwell-automation 23P PowerFlex DC Stand-Alone Regulator (SAR) Capac Instrukcja Użytkownika
(10 strony)
(10 strony)
Ekwipunek Rockwell-automation 56RF High Frequency 13.56 MHz RFID EtherNet/IP Int Instrukcja Użytkownika
(20 strony)
(20 strony)
Ekwipunek Rockwell-automation 20P PowerFlex DC Drive - Frame B Switching Power S Instrukcja Użytkownika
(10 strony)
(10 strony)
Ekwipunek Rockwell-automation 23C PowerFlex 400 AC Drive Packages for Fan & Instrukcja Użytkownika
(202 strony)
(202 strony)
Ekwipunek Rockwell-automation 20P PowerFlex DC Drive - Frame A SCR Modules for D Instrukcja Użytkownika
(18 strony)
(18 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.089 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji