Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Instrukcja Użytkownika Pobierz pdf (Strona 23)

Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013 23

Installing the Adapter Chapter 2

Connecting the Adapter to

the Network

1. Remove power from the drive.

2. Use static control precautions.

3. Connect one end of an Ethernet cable to the network. See Figure 5

for an

example of wiring to an EtherNet/IP network.

Figure 5 - Connecting the Ethernet Cable in a Linear Topology Network

Figure 6 - Connecting the Ethernet Cable in a DLR Topology Network

4. For Linear or DLR Network Topology, route the other end of the Ethernet

cable from the network through the bottom of the first drive, and insert its

cable plug into the option module ENET1 network port.

ATTENTION: Risk of injury or death exists. The PowerFlex drive may

contain high voltages that can cause injury or death. Remove power from

the drive, and then verify power has been discharged before installing or

removing the adapter.

Controller

(ControlLogix controller

shown with 1756-EN2TR Bridge)

Drive or SMC

(1)

(with 20-COMM-ER Option Modules)

Ethernet

Switch

Computer with

Ethernet Connection

To other

EtherNet/IP

networks

(1)

The option module’s ENET1 and

ENET2 network ports are used.

Controller

(ControlLogix controller

shown with 1756-EN2TR Bridge)

Drive or SMC

(1)

(with 20-COMM-ER Option Modules)

Computer with

Ethernet Connection

To other

EtherNet/IP

networks

1783-ETAP

(1)

The option module’s ENET1 and

ENET2 network ports are used.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 237 238

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Instrukcja Użytkownika Strona 23

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun