Rockwell-automation 20-COMM-R Remote I/O Adapter Instrukcja Użytkownika Strona 17
- Strona / 128
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
20-COMM-R Remote I/O Adapter User Manual
Publication 20COMM-UM004D-EN-P
Chapter 2
Installing the Adapter
This chapter provides instructions for installing the adapter in a PowerFlex
7-Class drive.
Preparing for an Installation
Before installing the adapter, verify that you have all required equipment.
See Required Equipment
on page 1-3.
Selecting Remote I/O Cables
Remote I/O adapters are connected to the Remote I/O network or link with
twinaxial cable used for Remote I/O and Data Highway Plus (DH+)
communications. When selecting a cable, remember these points:
• Only 1770-CD Belden #9463 is tested and approved for Remote I/O and
DH+ installations. Use other cables at your own risk.
• The maximum cable length depends on the baud rate.
• All three connectors (blue, shield, and clear) must be connected at each
node.
• Do not use a star topology. Only two cables may be connected at any
wiring point. You can use a series topology and daisy-chain two wires at
a point.
Topic Page
Preparing for an Installation
2-1
Selecting Remote I/O Cables
2-1
Commissioning the Adapter
2-2
Connecting the Adapter to the Drive
2-4
Connecting the Adapter to the Network
2-7
Applying Power
2-8
Baud Rate Maximum Cable Length
57.6 Kbps 3,048 m (10,000 ft)
115.2 Kbps 1,524 m (5,000 ft)
230.4 Kbps 762 m (2,500 ft)
- User Manual 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 5
- About This Manual 7
- Rockwell Automation 8
- Additional Resources 8
- Resource Description 9
- About This Manual P-3 9
- P-4 About This Manual 10
- Getting Started 11
- Features 12
- Compatible Products 13
- Required Equipment 13
- User-Supplied Equipment 14
- Safety Precautions 15
- Quick Start 16
- Installing the Adapter 17
- Commissioning the Adapter 18
- Connecting the Adapter to 20
- Applying Power 24
- 2-10 Installing the Adapter 26
- Configuring the Adapter 27
- Using the PowerFlex 7-Class 28
- HIM to Access Parameters 28
- Setting the Rack Address 29
- Setting the Baud Rate 30
- Setting the Starting Module 30
- Setting the Last Rack 31
- Setting the Rack Size 31
- Setting the I/O 32
- Configuration 32
- Setting a Fault Action 33
- Resetting the Adapter 34
- Viewing the Adapter Status 35
- Using Parameters 35
- Updating the Adapter 36
- Firmware 36
- Chapter 4 37
- Understanding the I/O Image 38
- Discrete I/O Image 40
- Size Valid Values 41
- 16-bit -32768 to 32767 41
- Block Transfer I/O Image 43
- Rules for Using Datalinks 44
- Datalink Scaling 45
- Example Ladder Logic 47
- Program Information 47
- ControlLogix Controller 48
- PLC-5 Controller Example 51
- Block Transfer Read 53
- Block Transfer Write 54
- All Controller Versions 55
- Chapter 5 59
- About Block Transfer 60
- Messaging 60
- Formatting Block Transfer 60
- Messages 60
- Executing Block Transfers 63
- Example Programs 64
- Ladder Logic Program 66
- SLC 500 Controller 69
- Examples 69
- Troubleshooting 75
- PORT Status Indicator 76
- MOD Status Indicator 76
- NET A Status Indicator 77
- Viewing Adapter Diagnostic 77
- Viewing and Clearing 79
- Table 6.B Adapter Events 80
- Specifications 81
- Regulatory Compliance 82
- Adapter Parameters 83
- CIP Objects 87
- Common Messages 88
- DPI Device Object 89
- DPI Parameter Object 91
- Descriptor Attributes 93
- Formulas for Converting 94
- Object-Specific Services 94
- DPI error code 95
- DPI Fault Object 101
- Instance Attributes 102
- DPI Alarm Object 103
- DPI Time Object 105
- C-20 CIP Objects 106
- Logic Command/Status Words 107
- Logic Status Word 108
- PowerFlex 700S (Phase II 109
- Control) and 700L (with 109
- 700S Control) Drives 109
- PowerFlex 750-Series Drives 111
- PowerFlex Digital DC Drives 113
- Glossary 115
- D Datalinks 116
- F Fault Action 117
- I Idle Action 118
- L Last RIO Rack 118
- N NVS (Nonvolatile Storage) 118
- R Rack Address 119
- S Scanner 120
- U Update 120
- Z Zero Data 120
- Rockwell Automation Support 128
- Documentation Feedback 128
Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 20-COMM-R Remote I/O Adapter
Ekwipunek Rockwell-automation 20P PowerFlex DC Drive - Frame B Bimetal Thermosta Instrukcja Użytkownika
(16 strony)
(16 strony)
Ekwipunek Rockwell-automation 23P PowerFlex DC Stand-Alone Regulator (SAR) Field Instrukcja Użytkownika
(10 strony)
(10 strony)
(6 strony)
Ekwipunek Rockwell-automation 20B PowerFlex 700 Gasket Kit - Frames 7-10 Instrukcja Użytkownika
(6 strony)
(6 strony)
Ekwipunek Rockwell-automation 45FSL General Purpose Fiber Optic Sensors Instrukcja Użytkownika
(4 strony)
(4 strony)
Ekwipunek Rockwell-automation 1203-SSS Smart Self-powered Serial Converter Instrukcja Użytkownika
(60 strony)
(60 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji