Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Instrukcja Użytkownika Strona 113
- Strona / 190
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 113
Chapter 8
Viewing the Adapter Web Pages
This chapter provides instructions on how to monitor the PowerFlex 755 drive
and its embedded adapter by using the adapter’s web interface.
Future enhancements may result in adapter web pages that look different than the
examples shown in this chapter.
Enabling the Adapter Web
Pages
After the adapter is configured and operating, you can view its web pages. They
present information about the adapter, the drive to which it is connected, and the
other DPI devices connected to the drive such as a HIM.
By default the adapter web pages are disabled. To enable the adapter web pages,
set Parameter 52 - [Web Enable] to ‘1’ (Enabled) and then reset the adapter for
the change to take effect.
Viewing the Web Pages
The adapter can be configured to automatically send e-mail messages to desired
addresses when selected drive faults occur and/or are cleared, and/or when the
adapter takes a communication or idle fault action.
Bit 0 of Parameter 53 - [Web Features] can be used to protect the configured
settings. For more details, see Configure E-mail Notification Web Page
on
page 118.
1. On a computer with access to the EtherNet/IP network on which the
drive/adapter is installed, launch a web browser such as Microsoft™
Internet Explorer, version 5.0 or later.
The computer can access the adapter web pages if it is connected to:
• The same network as the drive/adapter.
• A network with access to the drive/adapter’s network via a gateway
device (for example, a router).
Topic Page
Enabling the Adapter Web Pages 113
Viewing the Web Pages 113
Process Display Pop-up Dialog Box
116
TCP/IP Configuration Web Page 117
Configure E-mail Notification Web Page 118
Device Information Pages
121
- User Manual 1
- Important User Information 2
- Summary of Changes 3
- New and Updated 3
- Information 3
- Table of Contents 5
- Conventions Used in This 9
- Rockwell Automation 9
- Additional Resources 10
- Getting Started 11
- Features 12
- Compatible Products 13
- Required Equipment 13
- Chapter 1 Getting Started 14
- Safety Precautions 15
- Quick Start 16
- Installing the Adapter 17
- Setting the IP Address 18
- Connecting the Adapter to 20
- Applying Power 21
- Commissioning the Adapter 24
- Configuring the Adapter 25
- Using the PowerFlex 20-HIM 26
- A6 or 20-HIM-C6S HIM to 26
- Access Parameters 26
- Setting the Adapter IP 26
- Enabled 1 27
- Disable the BOOTP Feature 30
- Set the IP Address 30
- Set the Subnet Mask 30
- Setting the Data Rate 31
- Selecting Master-Slave or 32
- Peer-to-Peer Hierarchy 32
- Enable Datalinks To Read Data 33
- 0<<2 35
- Custom Peer I/O Configuration 36
- 10.00 Secs 37
- Setting a Fault Action 38
- Setting Web Access Control 40
- Resetting the Adapter 41
- Restoring Adapter 41
- Parameters to Factory 41
- Defaults 41
- ESC soft 42
- Viewing the Adapter Status 42
- Using Parameters 42
- Updating the Adapter 43
- Firmware 43
- Configuring the I/O 45
- ControlLogix Example 46
- Chapter 4 Configuring the I/O 50
- Configuring the I/O Chapter 4 53
- ADC and Logix Memory 66
- Monitoring ADC Progress 71
- Using the I/O 79
- Understanding the 80
- ControlLogix Controller I/O 80
- Using Logic Command/Status 81
- Using Reference/Feedback 81
- Using Datalinks 82
- Example Ladder Logic 83
- Program Information 83
- ControlLogix Controller 84
- Using the I/O Chapter 5 85
- Versions 86
- Program 87
- Program Tags 88
- Example Datalink Data 89
- Generic Profile 90
- Using Explicit Messaging 91
- About Explicit Messaging 92
- Examples 94
- Single Parameter 96
- Multiple Parameters 101
- Request (Source Data) array 105
- Troubleshooting 107
- ENET Status Indicator 108
- LINK Status Indicator 108
- Viewing Adapter Diagnostic 109
- Viewing and Clearing Events 111
- Table 12 - Adapter Events 112
- Viewing the Adapter Web Pages 113
- Process Display Pop-up 116
- Dialog Box 116
- TCP/IP Configuration Web 117
- Web Page 118
- Device Information Pages 121
- EtherNet/IP adapter) 123
- Specifications 125
- Appendix A Specifications 126
- Adapter Parameters 127
- Parameter List 128
- EtherNet/IP Objects 137
- Identity Object 138
- Assembly Object 139
- Register Object 140
- PCCC Object 141
- N-Files 143
- DPI Device Object 145
- Class Attributes 146
- Instance Attributes 147
- DPI Parameter Object 148
- Formula number 150
- Extended DPI descriptor 150
- Descriptor Attributes 151
- Formulas for Converting 153
- Common Services 153
- Object Specific Services 153
- DPI Fault Object 154
- DPI Alarm Object 156
- DPI Diagnostic Object 158
- DPI Time Object 160
- Host DPI Parameter Object 162
- TCP/IP Interface Object 168
- Ethernet Link Object 170
- 750-Series Drives 173
- History of Changes 175
- Glossary 177
- Rockwell Automation Support 190
- Documentation Feedback 190
Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt
(2 strony)
(4 strony)
Ekwipunek Rockwell-automation 509-TA_ Size 00 Enclosure Cover Replacement Instrukcja Użytkownika
(1 strony)
(1 strony)
Ekwipunek Rockwell-automation 825P Modular Protection System Quick Start Guide Instrukcja Użytkownika
(32 strony)
(32 strony)
Ekwipunek Rockwell-automation 842E EtherNet/IP Multi-Turn Encoders Instrukcja Użytkownika
(4 strony)
(4 strony)
Ekwipunek Rockwell-automation 440P Small Metal Safety Position Switches Instrukcja Użytkownika
(4 strony)
(4 strony)
Ekwipunek Rockwell-automation 281G ArmorStart - Safety Version - Getting Started Instrukcja Użytkownika
(24 strony)
(24 strony)
Ekwipunek Rockwell-automation 800Z Touch Button and Guard Installation Instrukcja Użytkownika
(1 strony)
(1 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji