Rockwell-automation 1757-SWKIT400 Getting Started with ProcessLogix R4 Instrukcja Użytkownika Pobierz pdf (Strona 13)

Getting Started with ProcessLogix R400.0 13

Publication 1757-QS040A-EN-P - October 2001

Configuring analog output modules

To configure an analog output module:

1. Double-click the IOM named LabAO.

This brings up the window for the 6-channel isolated analog output module

(1756-OF6CI; current output, or 1756-OF6VI; voltage output).

2. On the IOM Configuration window, select the Main tab and enter the

following parameters:

3. Select the Channel Configuration tab and enter the following parameters for

all channels:

4. Click OK.

Configuring digital input modules

To configure a digital input module:

1. Double-click the IOM with the name LabDI.

This brings up the window for the 16-channel, 24V DC isolated analog input

module (1756-IB16I).

in this field: enter:

IOM Slot Number the slot number containing this module

Remote I/O Chassis Mac Address 0

ControlNet Modulel Slot Number 0

in this field: enter:

Shed to Safe Value unchecked

Calibration Bias 0

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Brak uwag

Rockwell-automation 1757-SWKIT400 Getting Started with ProcessLogix R4 Instrukcja Użytkownika Strona 13