Rockwell-automation 1757-SWKIT400 Getting Started with ProcessLogix R4 Instrukcja Użytkownika Pobierz pdf (Strona 23)

Getting Started with ProcessLogix R400.0 23

Publication 1757-QS040A-EN-P - October 2001

10. Verify that the PID OP output value (displayed near the wire) changes.

11. Change the NUMERIC.PV to 20, then 30.

12. Click Yes when prompted to Change Online Value and click OK.

Observe the OP output of the PID block for changes.

13. Close the diagram without saving your changes.

Viewing Pre-built Screens

To view the pre-built screens provided with the ProcessLogix system:

1. If the Station application program is not running, select Start⇒Programs⇒

ProcessLogix Server⇒Station.

2. Click the text box in the upper right corner of the screen (below the

toolbar).

to view the detail screen for the: do this:

Controller 1. Type

CPM0101

in the box.

2. Press [F12].

CEE 1. Type

CEE0101

in the box.

2. Press [F12].

PID loop 1. Type

FIC102

in the box.

2. Press [F12].

I/O modules 1. Type the name of the I/O module in the box. [for

example, LabAI]

2. Press [F12].

Alarms Click the red, blinking alarm indicator at the bottom

of the screen, or click the Alarm icon in the toolbar

menu.

1 2 ... 18 19 20 21 22 23 24

Brak uwag

Rockwell-automation 1757-SWKIT400 Getting Started with ProcessLogix R4 Instrukcja Użytkownika Strona 23