Rockwell-automation 1757-SWKIT400 Getting Started with ProcessLogix R4 Instrukcja Użytkownika Pobierz pdf (Strona 5)

Getting Started with ProcessLogix R400.0 5

Publication 1757-QS040A-EN-P - October 2001

Verify the ControlNet Nodes Using NTools (Network Tools):

1. To view chassis configuration, click Start⇒Programs⇒ProcessLogix

Engineering Tools⇒NTools.

2. Click OK to acknowledge the warning.

3. Click NetworkTools⇒Settings.

4. Select the Ping option and click OK.

5. Click NetworkTools⇒Ping.

6. Click the CNB with Network Address 1. This can be found under the

Desktop tree icon in the upper left window.

7. Under the Local Chassis tab, adjust the number of slots in the scroll box to

match the number of slots in your local chassis and click OK.

8. Verify that all I/O modules appear as configured in the chassis.

9. If the I/O modules do not all appear, try the following:

• Check the power supply

• Reseat the module(s) in the chassis

• Adjust the number of Slots in Local Chassis

10. Select NetworkTools⇒Exit.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Brak uwag

Rockwell-automation 1757-SWKIT400 Getting Started with ProcessLogix R4 Instrukcja Użytkownika Strona 5