Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Instrukcja Użytkownika Strona 27

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 26
Publication 1761-UM006E-EN-P - August 2005
Installation and Wiring 2-5
1. Remove the mounting template from
the back of the installation instructions.
2. Secure the template to the mounting
surface.
3. Drill holes through the template.
4. Remove the mounting template.
5. Mount the unit.
ENI/ENIW Port
Identification
Ethernet Connections
Ethernet 8-Pin 10/100-Base-T Connector (Port 1)
The Ethernet connector is an RJ45, 10/100-Base-T connector. The
pin-out for the connector is shown below:
Mounting
Template
Write-on area for
Ethernet IP address
RS-232 Mini-DIN (Port 2)
Ethernet Port (Port 1)
Pin Pin Name
1Tx+
2Tx-
3Rx+
4 not used
5 not used
6Rx-
7 not used
8 not used
Przeglądanie stron 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 143 144

Komentarze do niniejszej Instrukcji

Brak uwag