Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Instrukcja Użytkownika Pobierz pdf (Strona 99)

Publication 1761-UM006E-EN-P - August 2005

Connecting CompactLogix Controllers on Ethernet 8-7

Figure 8.5 ENI #1 Configuration - Message Routing Screen

Before we download our configuration to ENI #1, we must configure

the “Utility Settings” tab in the ENI/ENIW Configuration Utility.

Choose the following settings.

Figure 8.6 ENI #1 Configuration - Utility Settings Screen

Then, connect the serial cable between your computer and ENI #1

and click on the ENI IP Addr tab. From this tab, under the “Save To”

column, click the ENI ROM button. This downloads your

configuration parameters to ENI #1 and saves it to non-volatile

memory.

Configure ENI #2

ENI #2 is connected to the CompactLogix controller. This ENI/ENIW

must be configured with its own IP address (131.200.50.94 for this

example) and we must add the IP addresses of the SLC 5/05 controller

and the 1756-ENBT/ControlLogix controller to its Message Routing

table. The Message Routing table allows for up to 50 IP addresses to

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 143 144

Brak uwag

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Instrukcja Użytkownika Strona 99