Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Instrukcja Użytkownika Pobierz pdf (Strona 61)

Publication 1761-UM006E-EN-P - August 2005

ENI/ENIW Configuration (Nodes 241 to 254) 4-21

The ENI/ENIW performs the following Email Authentication

configuration operations when receiving a 485CIF/PLC2 Unprotected

Write message of one element (integer) to Node 244.

• 0 = Disabled

• 1 = Enabled

Node 243 - SMTP Email Authentication Password (Series D Only)

Many open mail servers now require user authentication for email.

Node 243 allows a 45 character Password to be defined for email

service (series D units only). Criteria for the Password includes:

• SMTP Email Authentication must be enabled. See Node 244 on

page 4-20.

• The Password remains at the default value unless changed by

the user. See page 4-12 for the Password default values.

• The Password cannot contain any spaces or special ASCII

characters.

• The maximum length of the Password is 45 characters. Any

additional characters are ignored.

• To configure the Password, initiate a message with a string

element as the data. See the message instruction procedure on

page 4-25.

Node 242 - SMTP Email Authentication Username (Series D Only)

Many open mail servers now require user authentication for email.

Node 242 allows a 45 character username to be defined for email

service (series D units only). Criteria for Username includes:

• SMTP Email Authentication must be enabled. See Node 244 on

page 4-20.

• The Username remains at the default value unless changed by

the user. See page 4-12 for the Username default.

• The Username cannot contain any spaces or special ASCII

characters.

• The maximum length of the Username is 45 characters. Any

additional characters are ignored.

• To configure the Username, initiate a message with a string

element as the data. See the message instruction procedure on

page 4-25.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 143 144

Brak uwag

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Instrukcja Użytkownika Strona 61