Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Instrukcja Użytkownika Pobierz pdf (Strona 76)

Publication 1761-UM006E-EN-P - August 2005

6-6 EMail Messages (Node 50 to 99)

2. Open the message instruction and enter the appropriate

variables. The variables are described in Table 6.2.

Table 6.2 Message Instruction Variables for Sending an Email Message

Variable Setting

This Controller Parameters:

Communication Command 485CIF/PLC2

Data Table Address Any valid string, such as ST25:21 as shown below.

Size in Elements 1

Channel The RS-232 communication channel that is connected to the

ENI/ENIW, typically 0 or 1.

Target Device Parameters:

Message Timeout Increase this value to 10 or greater to avoid MSG timeouts.

Data Table Offset Always 0.

Local Node Addr (dec). This is the destination node address. Nodes 50 to 99 send

email messages; nodes 150 to 199 configure the email

address.

Local/Remote Always Local.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 143 144

Brak uwag

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Instrukcja Użytkownika Strona 76