Rockwell-automation 1771-N SERIES High Resolution Analog Module User M Instrukcja Użytkownika Pobierz pdf (Strona 22)

2–4 Installing the Module

Publication 1771ĆUM127B-EN-P - December 2002

Swing the chassis locking bar down into place to secure

the modules. Make sure the locking pins engage.

1771ĆA1B, ĆA2B, ĆA3B, ĆA3B1, ĆA4B I/O chassis

1771ĆA1B, ĆA2B, ĆA3B1, ĆA4B Series B I/O chassis

locking tab

card guides

module

19809

card guides

locking bar

locking bar pin

Snap the chassis latch over

the top of the module to secure it.

3. Connect the 1771-NC cable to the module as shown in Figure 2.1.

A. Slide the locking bar up.

B. Insert the cable connector into the mating connector on the

front of the module.

C. Slide the locking bar down over the mating pins on the

module to lock the connector onto the module.

Figure 2.1

Connecting the Cable to the Front of the Module

1. Position locking bar in up position.

2. Insert connector into mating connector.

3. Slide locking bar down to lock.

Locking bar

Cable Connector

Module Connector

11023ĆI

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 187 188

Brak uwag

Rockwell-automation 1771-N SERIES High Resolution Analog Module User M Instrukcja Użytkownika Strona 22