Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Instrukcja Użytkownika Pobierz pdf (Strona 53)

Appendix B

Adapter Parameters

Appendix B provides information about the adapter parameters.

The parameters in the adapter are numbered consecutively. However,

depending on which configuration tool you use, they may have different

numbers.

Topic Page

About Parameter Numbers

B-1

Parameter List B-1

About Parameter Numbers

Configuration Tool Numbering Scheme

• DriveExplorer

• DriveExecutive

• HIM

The adapter parameters begin with parameter 1. For

example, Parameter 01 - [Reset Module] is parameter 1 as

indicated by this manual.

Parameter List

Parameter

No. Name and Description Details

01 [Reset Module]

No action if set to “0” (Ready). Resets the adapter

if set to “1” (Reset Module). Restores the adapter

to its factory default settings if set to “2” (Set

Defaults). This parameter is a command. It will be

reset to “0” (Ready) after the command has been

performed.

Default: 0 = Ready

Values 0 = Ready

1 = Reset Module

2 = Set Defaults

Type: Read/Write

Reset Required: No

ATTENTION: Risk of injury or equipment damage exists. If the adapter is

transmitting I/O that controls the drive, the drive may fault when you reset the

adapter. Determine how your drive will respond before resetting a connected

adapter.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 71 72

Brak uwag

Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Instrukcja Użytkownika Strona 53