Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Instrukcja Użytkownika Pobierz pdf (Strona 61)

Appendix D

Routing Capability for Networked

Drives

Appendix D provides information about the unique routing capability for

up to 127 PowerFlex 4/4M/40/400 drives on a BACnet MS/TP network

when using the DriveExplorer (Full version only) drive software tool.

First, configure the 22-COMM-B adapter in each networked drive (or

DSI External Comms Kit) using the procedures described in Chapter 2

(NOTE: To be compatible with PowerFlex 4M drives, the 22-COMM-B

adapter must have firmware version 1.003 or later.) Then use a 1203-USB

or 22-SCM-232 converter to connect the first networked drive to a laptop

or desktop PC with DriveExplorer Full. Thereafter, you can use

DriveExplorer Full to route to any drive on the BACnet MS/TP network

to configure or monitor the drive or any of its connected peripherals.

Figure D.1 BACnet MS/TP Network Routing Capability

PowerFlex 4-Class Drives

PowerFlex 40 and PowerFlex 400 Drives (with internally-mounted 22-COMM-B adapters as shown) or

any PowerFlex 4-Class Drives (typically PowerFlex 4 and PowerFlex 4M) connected to 22-COMM-B

adapters that are mounted in DSI External Comms Kits.

BACnet MS/TP Network

Drive Cable

1203-USB

Converter

Laptop or

Desktop PC

with DriveExplorer Full

Use DriveExplorer Full to connect

to a single drive and configure

its installed BACnet adapter

Use DriveExplorer Full to route through DSI to drives

connected directly on BACnet (Up to 127 drives!)

PC Cable

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 71 72

Brak uwag

Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Instrukcja Użytkownika Strona 61