Rockwell-automation 25-COMM-P PowerFlex PROFIBUS DPV1 Adapter Instrukcja Użytkownika Pobierz pdf (Strona 23)

Rockwell Automation Publication 520COM-UM004A-EN-E - November 2013 23

Chapter 3

Configuring the Adapter

This chapter provides instructions and information for setting the parameters to

configure the adapter.

For a list of parameters, see Adapter Parameters

on page 77. For definitions of

terms in this chapter, see the Glossary

on page 85.

Configuration Tools

The adapter parameters can be configured using the drive keypad interface (see

page 23

) or a PowerFlex 4-class HIM (Human Interface Module, see page 25).

Connected Components Workbench (version 3 or greater) can also be used to

access the adapter parameters.

Using the Drive Keypad

Interface to Access

Parameters

The following is an example of basic integral keypad and display functions. This

example provides basic navigation instructions and illustrates how to program a

parameter.

Topic Page

Configuration Tools

Using the Drive Keypad Interface to Access Parameters 23

Using the PowerFlex 4-Class HIM to Access Parameters 25

Setting the Node Address 25

Using Master-Slave Hierarchy (Optional) 26

Setting a Fault Action 27

Resetting the Adapter 28

Restoring Adapter Parameters to Factory Defaults 29

Viewing the Adapter Status Using Parameters 29

Updating the Adapter Firmware 29

IMPORTANT

The adapter Device parameters can be accessed on the drive keypad via the “N”

(Network) group. Note that the parameters in the “N” group will appear offset

from the Device parameter numbers referenced in this manual by 1000

(decimal) on the LCD display.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 93 94

Brak uwag

Rockwell-automation 25-COMM-P PowerFlex PROFIBUS DPV1 Adapter Instrukcja Użytkownika Strona 23