Rockwell-automation AADvance Controller Configuration Guide Instrukcja Użytkownika Pobierz pdf (Strona 159)

100

101



Document: 553633

ICSTT-RM405f-EN-P

Issue 07

6-5

Configure the IP Address of the Target Controller

To connect the AADvance Workbench project to the target controller you have to

tell the project the IP addresses allocated to the controller. Do the following:

1) Select the Hardware Architecture view then double-click on the vertical

connection between the SNCP network line and the configuration.

2) The Connection - Properties dialog box opens.

3) Enter the IP Addresses in the Value field for each of the required Ethernet

network. Press Enter after typing each IP address.

Note: The value shown above is a default value. Enter a value that you require.

4) Click OK.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 285 286

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation AADvance Controller Configuration Guide Instrukcja Użytkownika Strona 159

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation AADvance Controller Configuration Guide