Rockwell-automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Instrukcja Użytkownika Pobierz pdf (Strona 54)

5-8

DeviceNet Adapter for use with DPI AC Drives

Step 2. In the Memory box, select a location in scanner memory

from table 5.5.

In our example, we are using a 1747-SDN scanner and selected

Discrete.

Step 3. In the Start Word box, select the word in memory at which

the data should start. In our example, we selected 1. Logic

Command and Speed Reference data should be written to

O:1.1 and O:1.2, respectively.

5.4 Saving the Configuration

After configuring a scanner, you must download it to the scanner.

You should also save it to a file on your computer.

Step 1. In the Scanner Module dialog box (figure 5.6), click

Apply

to save the configuration to the scanner. A Scanner

Configuration Applet appears and asks if it is OK to

download the changes.

Step 2. Click

Yes

to download the changes. The changes are

downloaded and then the Scanner Module dialog box

reappears.

Step 3. Click

to close the Scanner Module dialog box.

Step 4. Select

File > Save

. If this is the first time that you saved

the project, the Save As dialog box appears. Navigate to a

folder, type a file name, and click

Save

to save the

configuration to a file.

Table 5.5 – Scanner Module Memory Locations

Scanner Memory Locations

1747-SDN Discrete or M-File

1756-DNB Assembly Data

1771-SDN Block Xfer 62 – 57

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 167 168

Brak uwag

Rockwell-automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Instrukcja Użytkownika Strona 54