Rockwell-automation SD3000 Drive Configuration, Programming Instrukcja Użytkownika Pobierz pdf (Strona 25)

Table 3.4

Fault Register and Check Bit Fault Counter Register Usage

for a Digital

l/O

Rail or

4-Output

Analog Rail Module

Bit 8: No device plugged into a configured port

Bit 9: Bad ID code: device other than a rail is plugged into the port

Bit IO: Bad rail communication check bits received

Table 3.5

Fault Register and Check Bit Fault Counter Register Usage for a 4-Input Analog Rail Module

Drive A

Registers

Drive B

Registers

Description

Port 0 Fault Register

Port 1 Fault Register

Bit 0: Analog Channel 0 Input Over-Range

Bit 1: Analog Channel 0 Input Under-Range

Bit 2: Analog Channel 1 Input Over-Range

Bit 3: Analog Channel 1 Input Under-Range

Bit 4: Analog Channel 2 Input Over-Range

Bit 5: Analog Channel 2 Input Under-Range

Bit 6: Analog Channel 3 Input Over-Range

Bit 7: Analog Channel 3 Input Under-Range

Bit 8: No device plugged into a configured port

Bit 9: Bad ID code: device other than a rail is plugged into the port

Bit 10: Bad rail communication check bits received

Bit 11: PMI interface is not ready

Port 0 Check Bit Fault Counter Register

Port 1 Check Bit Fault Counter Register

The register can be reset by setting bit 9 of the Warning Reset register

(100/l 100)

3-5

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 117 118

Brak uwag

Rockwell-automation SD3000 Drive Configuration, Programming Instrukcja Użytkownika Strona 25