Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Instrukcja Użytkownika Pobierz pdf (Strona 35)

100

101

Chapter 2

Operating the Control

2-15

You can select the:

axis to jog

type of jog

speed multiply value (see manual operating mode on page 4-1)

HPG number (if HPG has been selected as the type of jog)

2. Use the up and down cursor keys to select a parameter and the left

and right cursor keys to alter the value assigned to that parameter.

3. Jog the selected axis in the selected direction by:

If jog type is: Then:

NotHPG pressthe softkey thatcorrespondsto thedirection on the

selected axis tojog

HPG thedirectionofHPG rotationdeterminesthe directionto jog

See page 4-2 for details on jogging an axis.

Set Zero

If you want to shift the current work coordinate system to force the current

wheel position t o be the zero point of the work coordinate system, press

the

{SET ZERO} softkey.

The current axis position becomes the zero point of the currently active

work coordinate system.

The

{SET ZERO} softkey does not function when the control is i n

handwheel mode. See page 11-18 for details on set zero operations.

ProgramExecute Screen

After accessing the software front panel screen and selecting the various

feat ures for your application, you can use the program execute screen to

perform a:

block retrace

jog retract

cycle start

cycle stop

Important: Before you press the {PRGRAM EXEC} softkey, you should

have selected a program for automatic execution as described on page 7-6.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 819 820

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Instrukcja Użytkownika Strona 35

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra