Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Instrukcja Użytkownika Pobierz pdf (Strona 311)

100

101

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012 311

Using DeviceLogix Appendix C

7. Move the mouse cursor toward the Set input of the reset function. A line

will follow the cursor. When a connection can be made, the tip of the RSL

function will also turn green. Click the on Input and the line will be drawn

from In 0 to the Set Input of the reset function.

Note: If this was not a valid connection, one of the pin tips would have turned

red rather than green. Left double clicking on the unused portion of the grid or

pressing the “Esc” key at any time will cancel the connection process.

8. From the toolbar, Click on the “Bit Input” button and select In 1 from the

pull-down menu. This is the remote stop button based on the example I/O

table.

9. Place the input to the left of the reset function.

10. Connect the input to the reset input of the reset function.

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 347 348

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Instrukcja Użytkownika Strona 311

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual